Call (619) 795-2118

Go to…

Cadillac

Home / Cadillac

We Service and Repair all Cadillac cars

  • 2005 Cadillac SRX

    Cadillac SRX
    Mileage
    75,333
    Service Date
    4/9/2026
    Services Performed
    • VEHICLE INSPECTION: Found cable became detached from latch mechanism. Need to Remove trunk interior trim panel to access latch assembly. Reconnect and secure release cable to latch mechanism. Inspect latch and cable for damage; Test trunk operation to ensure proper opening and closing.
    • AFTER REPAIRS, TRUNK OPENING AND CLOSING NORMAL.
     
    DAROLD H. gave our service a 5 star review on 4/10/2026

  • 2019 Cadillac XT5

    Cadillac XT5
    Mileage
    68,723
    Service Date
    5/15/2024
    Services Performed
    • VEHICLE INSPECTION: SCAN CHECK FOR CODES, FOUND CODE #P0128 ENGINE COOLANT TEMPERATURE. NEEDS THERMOSTAT. ALSO, FOUND FRONT BRAKES LESS THAN 10% LIFE REMAINING, AIR FILTER AND CABIN AIR FILTER DIRTY. RECOMMEND FRONT BRAKES, AIR FILTER AND CABIN AIR FILTER.
    • THERMOSTAT – Remove & Replace – [Includes: R&I Water Outlet. Includes: R&I Intake Manifold. Includes: R&I Fuel Rails.]
    • DISC ROTOR – Remove & Replace – Front,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
    • CABIN AIR FILTER – Remove & Replace
    • CHECKED AND TOPPED FLUIDS. SET TIRE PRESSURE TO 35 PSI.
     
    JULIO D. gave our service a 5 star review on 5/16/2024

  • 2013 Cadillac SRX

    Cadillac SRX
    Mileage
    127,029
    Service Date
    3/9/2023
    Services Performed
    • INSPECTED ALL POINTS ON SAFETY AND MAINTENANCE LIST AS APPLICABLE AND FOUND: OIL SHORT AND DIRTY. RECOMMEND OIL CHANGE.
    • SET TIRE PRESSURE TO 35 PSI.
     
    MICHAEL B. gave our service a 5 star review on 3/9/2023

  • 2011 Cadillac SRX

    Cadillac SRX
    Mileage
    197,201
    Service Date
    11/25/2022
    Services Performed
    • VEHICLE INSPECTION: FOUND BELT RIPPED DUE TO IDLER PULLEY AND BELT TENSIONER WORN OUT/HAVE PLAY. NEEDS IDLER PULLEY, BELT TENSIONER AND SERPENTINE BELT.
    • POWER STEERING PUMP DRIVE BELT TENSIONER – Remove & Replace – 3.0L Eng – [Includes: Replace Belt (if necessary).]
    • POWER STEERING BELT IDLER
    • CHECKED AND TOPPED FLUIDS. SET TIRE PRESSURE TO 35 PSI.
     
    BRYAN G. gave our service a 5 star review on 11/28/2022